ES Parts For Sale

[Ian F]

Sicne I've decided to hold off on restoring an 1800 for a few years, I've decided to sell off the collection of parts I've been slowly collecting over the past couple of years.  All parts new unless otherwise noted.  I'll leave them here and on maybe on the 1800list before turning to sleazeBay...

Skandix exhaust system for E/ES w/ fitting kit:
Online price: $405
My price: $350

Classic Tube OE steel brake line kit (NOT stainless).
Classic price: $175
SOLD

Foreign Autotech Body Repair Parts:
I forget how much they cost me and Mike doesn't show prices online anymore...
Front Floor pans.  Left & Right.  $50 each. SOLD
Sill repair parts.  Includes inner and outer sill panels. $50 each.
Driver's side rear cross member: $30
Long Frame Rails (2 available): $50 each.

Dash caps, upper and lower:
IPD Price: $150
My price: $50 SOLD

There are a lot more small parts that'll post later.  I need to make a list when I get home.  All prices negotiable to some extent.

[PaulGraz]

Is that a SS exhaust?  I'm guessing not...

I think we could use the floor pans too...

[Jerseygirl]

Correct.  The exhaust system is NOT stainless.

[Ian F]

Ok... MORE stuff!   :shock:

Grab a drink, this is quite a list....  :oops:

1. Door seals (on door, L&R) IPD: $48 ea, my price: $40 ea.

2. Door seals (on body, L&R) IPD: $72 ea, my price: $50 ea.

3. Front Brake Pads (Girling Calipers) IPD: $24.00, my price: $15 SOLD

4. Rear brake Pads (Girling Calipers) Foreign Autotech: $21.65, my price: $15 SOLD

5. Front brake hoses (4) Foreign Autotech: $32.50 each, my price: $25 ea.

6. Rear Brake hoses (2) Foreign Autotech: $32.50 each, my price: $25 ea.

7. Front brake caliper hardware kit. Foreign Autotech: $9.95, my price: $7 SOLD

8. Center support bushing (rubber only). IPD: $12.50, my price: $5

9. U-Joints (small style, fits mot cars). IPD: $13 ea, my price: $10 ea. SOLD

10. Center Support Bearings (qty 2). IPD: $21 ea, my price: $15 ea. (one needed per car... why do I have two?  I have no idea...)

11. B20 Fan belt. IPD: $5, my price: $3 SOLD

12. Front motor mounts. IPD: $11.90 ea, my price: $7.50 ea. SOLD

13. Rear Transmission mount. IPD: $12.20, my price: $10 SOLD

14. Heater Hose, Core-Head fitting, IPD: $8.50, my price: $8 (includes the nice IPD hose clamps)SOLD

15. Heater Hose, Core-Control Valve, IPD: $8.50, my price: $8 (includes the nice IPD hose clamps)SOLD

16. Radiator Hose - Top, IPD: $8.95, my price: $8 (includes the nice IPD hose clamps)SOLD

17. Radiator Hose - Bottom, IPD: $8.00, my price: $7 (includes the nice IPD hose clamps)SOLD

18. Thermostat for B20, IPD: $12.50, my price: $8

19. Driveshaft spline boot. Don Thibault: $15.00, my price: $10  

20. Upper ball joints. IPD: $39 ea, my price: $25 ea.

21. IPD Dash Caps (upper & lower). IPD: $150.00, my price: $50 (passing along the good deal John gave me). SOLD

22. ES Front & Rear emblems (used, but in nice condition).  $20

23. Washer nozzles, OEM style, pair in nice condition. $20

24. Hand-brake handle/lever boot (under carpet). $5 SOLD

25. Throttle pedal; bolts to floor, proper narrow-screw style, rather than the wide-style often sold on Ebay which requires drilling a new hole (ask me how I know...). $12 SOLD

26. Jack hold-down T-nut (used, but in decent condition). $10. SOLD

27. ES Door sill seal/carpet trim piece. (Swedish Treaser's price: $23 ea. my price $20 ea.

Ok... I think that's it for now...  Will try to post pics or at least make them available if interested. Many parts include installation at the Resch Speed Shop, if desired.  All prices negotiable... combination discounts, of course. Shipping extra if needed.

[jecoutant]

Ian,

Quite a list.  Most of these I don't need but I would be happy to buy 3 items.
Numbers 12 and 12   The engine and transmission mounts -  Getting time to replace.
Number 25   The throttle pedal  - When I did the carpet, I noticed how old my was getting.

I will would be happy to send you the money to hold them until we get together next.

Thanks, John

[Ian F]

I will would be happy to send you the money to hold them until we get together next.

Thanks, John

Sounds good.  Let me know when you're in town and maybe we can meet up.

[PaulGraz]

OK, I'll take #'s 3, 4, 7, 9, 11.

Also - 27?  Is that the metal trim piece that holds the carpet down along the sill?  This is a pair?  I'll check the ES when I get home tonight, I think we could use those too...

Maybe more - I need to check some other things at home tonight too...

[jecoutant]

Ian,

I am in town this week but leaving again on Sunday and it is kind of busy.  I am back 14 May until the end of the month.  Should have the 1800 back on the road also by then.  Let me know as it gets closer to the 14th when would be a good time and I will bop over.

John

[Ian F]

Also - 27?  Is that the metal trim piece that holds the carpet down along the sill?  This is a pair?  I'll check the ES when I get home tonight, I think we could use those too...

Yes. It sort of clamps the seal and the carpet down to the seal with three screws.  One on each side.  $20ea.

[gmitchels]

Ian,

Put me down for these two items:

24. Hand-brake handle/lever boot (under carpet). $5
26. Jack hold-down T-nut (used, but in decent condition). $10.

[Ian F]

Thanks George!

[jecoutant]

Ian,

Back in town.  Let's set up a time to meet when it is OK for you.  I am flexible, even after work if I don't have a late afternoon meeting.

[jecoutant]

Ian,

A few of my side marker lenses are not in 100% shape.  Any possibility of a trade plus $ if you have good ones to replace the ones I have?

[Ian F]

Ian,

A few of my side marker lenses are not in 100% shape.  Any possibility of a trade plus $ if you have good ones to replace the ones I have?

Doh!  Missed your post over the w/e...  :oops:

I'll take a look at the lenses on the green car.  I can pull them off and bring them to compare.  

Hopefully sometime this week.